The C4 Zigbee Interface is used for direct native control of any SI 485 shade or screen using the same C4 Zigbee mesh network. No other gateway or interface is needed, and full discovery and control is performed in the C4 Composer Pro software.
NOTE: this is not a Zigbee 3.0 device
C4 Zigbee
485 to C4 Zigbee Interface
Features
- Easily integrates with Control 4 with certified driver
- Connects directly to AC motors for power
- Identifies and connects to the motor automatically
- Provides feedback to the Control 4 system within 500ms(realtime response)
Power Input
- AC 485 Motors +9v DC
- 24v DC Motors +24-28v DC
Power Consumption
- DC @ 50mA
Material
- ABS
Operating Temperature
- Ambient Temperature
Dimensions
- 4’’ L x 2’’ W x 1” H
(100 mm x 50 mm x 24 mm)
Parts in the Box
- #202741
- Interface, C4/ZBDMI bridge, Cat5e
Works with
- Nano AC and DC 485 shades, and Solo 3 AC or DC 485 Screens and MOAB
LEDs
- Left LED – Green – Power
- Right LED – Red – C4 Zigbee link status
Orange > Green(Flashing) – 485 BUS act.
Orange (Flashing) – Inclusion mode
Orange (Solid) – Connected to C4 Zigbee
Orange (Off) – Not joined to any network
