Best Sound. Best Image. Lights On.
We created Slate® AT to give customers the best of both worlds; the best image and the best sound. Pure and Slate® deliver peerless image uniformity and remarkably sharp image reproduction by managing the texture pattern down to 9 times finer than standard white or gray materials.
Invisible
Sound
Imagine hiding your favorite LCR speakers behind a massive Zero Edge® screen with our popular Backlighting system. Even with the lights on.
Acoustic
Perfection
The effect of the perforated screen has very little attenuation starting at about 1-2kHz and up. Typical impact on frequency response is well within the -3db range with a peak attenuation of -6db at 20kHz. This difference is easily corrected by most modern receivers with room correction. Additionally, many architectural speakers feature a treble compensation switch to adjust for this type of installation.
Slate AT 1.2 |
|
|---|---|
| Max Width | 3600″ (91440mm) |
| Max Viewing Height | 102″ (2591mm) |
| Resolution | 8k |
| Gain | 1.2 |
| ALR | 65% |
| Half Gain | 35° |
| Hole Size | 0.55mm (21 thousandths) |
| Openness | 7% Open |
| Minimum Throw | 1.5 x Image Width |
| Projection Type | Front Only |
| Opaque | No |
Viewing Cones
Not sure what material is best for you? Check out our Screen Material Wizard!
